usually means you have a turn signal bulb in the front or rear burnt out.
when you flip your blinker on, a relay in the circuit is activated which turns the light on and off. also, the front blinker and rear blinker usually alternate in turning off and on, so when the back is on, the front will be off, and reverse.. that's why when a bulb is out, the clicking sound in the vehicle goes faster than when both are in working order.
The turn signal flasher is what makes the noise and lets the turn signal flash.
Blinker relay is under steering column. In fuse box, there is a relay in right corner. If your blinkers don´t flash, that is usually broken.
Usually this tells you that 1 or more lights are burnt out.
emergency blinker
in the steering column.
Most blinker circuits do not flash if one bulb is burned out. If the bulbs are all OK then the flasher is probably bad.
Someone is pulling your leg. There is no such thing as blinker fluid! I like to dilute the blinker fluid 50/50 with water. It makes the fluid last longer and the lights flash much brighter....... :)
need to replace blinker bulb
AnswerTo fix it do this : say the drivers side blinker goes on and does not flash. Well then you have either the front or rear blinker burned out. Thx KBThere's the possibility of burned bulbs, but if both sides fail to blink, replace the flasher unit.
When you say blinker I assume you mean the trafficator/Hazard light?? If so then it is actually the Hazard switch which is located on the panel by the gear lever.
REPLACE THE BULB