0
What else can I help you with?
What causes engine cut out and miss momentarily on 1996 Oldmobile Achieva 2.4 liter?
the transmission is clogged with congellied oil
What is the firing order for a 1998 Oldsmobile Achieva?
Which engine?
Where is the oil filter located on a 1997 Oldsmobile Achieva?
Which engine is in this car?
What other engine will interchange with a 2.4 in a 97 Achieva?
only another 2.4L
Where is the starter on a 98 Oldsmobile achieva?
Under car by where engine and transmission meet.
Where is the EGR valve on 1994 Oldsmobile achieva 2.3l?
There is NOT an EGR valve on this engine.
How do you replace the water pump on a 1995 Oldsmobile Achieva?
is it hard to change the water pump on a 1992 Oldsmobile achieva. Yes, it is very hard to replace a water pump on an Achieva. When the pump died on my 1996 Achieva, the engine needed to be unbolted and removed to get to it. As I recall, it cost about $500. I have a 95 Olds Achieva 3.1 and the water pump was very easy to change. Mine is on the front passenger side of the engine. Very easy to get to, just be careful not to break any bolts off. lol
Where is O2 sensor on 97 Oldsmobile Achieva 2.4 liter engine?
They are in the exhaust flow
Your 96 achieva engine cranks but will not fire whats the problem?
There are several reasons why a 1996 Achieva engine cranks but will not fire. A few of the reasons could be a bad ignition control module, ignition coil pack, or a crankshaft position sensor.
You just put engine coolant on your 1995 Oldsmobile achieva and the engine coolant light wont turn off?
The coolant level switch on a 95 Achieva has a sticking problem. If you tap the coolant tank near the sensor the light will go out
Where is the ignition control module on a 92 Oldmobile Achieva?
UNDER VALVE COVER ON TOP OF ENGINE UNDER VALVE COVER ON TOP OF ENGINE
Where is thermostat in 1997Oldsmobile Achieva?
In the 1997 Oldsmobile Achieva, the thermostat is located in the engine compartment, specifically on the engine's water outlet housing, which is typically near the top of the engine. To access it, you may need to remove the upper radiator hose that connects to the thermostat housing. It's advisable to have the engine cool before attempting to replace the thermostat to avoid burns or injury.
