Fuses That "Blow" Repeatedly
Fuses [and Circuit Breakers] are safety devices designed and installed in electrical circuits TO PROTECT the conductors [wires] from short circuits and overload [too many power using devices, or too large] conditions which can cause extreme overheating that can result in damage to the insulation and the conductors. And worse the possibility of a FIRE which could destroy the vehicle, house, or other structure in which the circuit is located.
When a fuse [and replacement fuses, or Circuit Breakers trip] "blow," especially if it happens repeatedly, is an indication of an UNSAFE CONDITION in that circuit, usually a short.
The proper "fix" is for a qualified technician, who knows what he/she is doing, to troubleshoot the involved circuit, find and identify the defect, and make proper repair [s], BEFORE replacing the fuse again [with the properly sized fuse or circuit breaker].
Some ignorant few will suggest installing a larger fuse or breaker to solve the problem, BUT that will only amplify the problem, not solve it. Do not follow "bad" advice and install a larger fuse in a misguided attempt to correct the problem. To install a larger fuse would almost guarantee damage to the wiring and an electrical system fire.
A short.
Short in the wiring.
WHY MY ECU 15AMP FUSE BLOWS EVERYTIME I START MY 97 ACURA INTEGRA
The fuel pump is shorting out and that is why the ecm fuse is blowing .Disconnect the the fuel pump and try it again,if the fuse blow's again then it is not the fuel pump.
Obviously something's wrong in the circuit.
There seems to be a short to ground in the wiring somewhere.
not usually!!if fuse is blowing out check for short!!
Find out why the fuse is blowing. You have a short or the circuit is overloaded.
Short or incorrect size fuse. Make sure you are installing the correct fuse. If so, look for a short in the wiring.
Obviously, if any fuse keeps blowing there is a serious fault in that circuit.Take it somewhere they can fix it.
You have a short circuit that keeps blowing the fuse. Find and repair the short before putting a in new fuse.
It is very common for the starter to be the cause of that fuse blowing.