motion of the electrode causes different pattterns in th formation ofthe cooling weld puddle. You can alter the weld patter by changing the electrode motion,,ex: motion straight across the weld zone and dropping electrode position say (1/8th inch) produces given pattern..same pattern with a slight upward motion at edges of weld zone another pattern...etc etc
excessive We were taught 2-1/2 times the width of the electrode was maximum. ie: 5/16" width weld bead for 1/8" electrode.
The angle of the electrode, the speed of the electrode used to weld and the size of the electrode.
There are 4 basics to producing a good weld bead. Correct #1 Amperage #2 Electrode Angle #3 Arc Length #4 Travel Speed Factor in electrode manipulation in some cases.
A bead is a compleated weld pass. Just like a bead of glue or adhesive, it is the same way. A compleatley bonded joint.
Because if you do it right it looks like a string of beads.
what characteristics does the weld bead have when weaving the electrode
excessive We were taught 2-1/2 times the width of the electrode was maximum. ie: 5/16" width weld bead for 1/8" electrode.
The angle of the electrode, the speed of the electrode used to weld and the size of the electrode.
4millimeter... :P
A narrow, straight weld bead that is created by moving the SMAW electrode straight along the weld joint. A quality stringer bead should have good tie-in on both sides of the weld.
6013 is a mild steel electrode that bridges the span between mild steel and medium steel. It has a lot of the characteristics of the 60s type electrode but with a thicker coating that doesn't spatter as much and can be used with either AC or DC Polarity. 60 equals 60,000 lbs tensile strength, 1 equals all position, 13 states basic coating type and denotes AC plus DC useage. The deposited bead has a thicker slag coating than 6010, 6011, 6012.
6013 is a mild steel electrode that bridges the span between mild steel and medium steel. It has a lot of the characteristics of the 60s type electrode but with a thicker coating that doesn't spatter as much and can be used with either AC or DC Polarity. 60 equals 60,000 lbs tensile strength, 1 equals all position, 13 states basic coating type and denotes AC plus DC useage. The deposited bead has a thicker slag coating than 6010, 6011, 6012.
A bead doll tableau is a bead sculpture scene that is made primarily of beads. For example, you would start with some ceramic doll parts (head, hands, etc) then build an armature, then start weaving beads around it to make the body and or clothes etc. Some people go as far as to take a large tile and cover it with bead wax and stick on beads to make a floor, then bead furniture, then, bead dolls to sit on the furniture, or even make bead curtain walls out of loomed Delica beads! I have also seen a pillow made with shaggy fringe of green bugle beads, then stuffed, beaded farm animals were made to graze on the bead "grass"!
they use art to paint what they are feeling at that moment.
Get it removed it could cause serious damage!
Short bead as well as arc strikes create a sudden localized temperature increase to the metal and can cause cracking.
A cylinder bead is usually called a bugle bead.