sperm,feecis,paprika,not sure what else mate. Dont own pool
No reason. you can as a mater of fact I know someone that put a large above ground pool almost totally in the ground he left about 150 mm/6niches sticking out of the ground. dug the hole big enough to set it up, filled it with water, then back filled the edge around the pool with a 10 to 1 sand cement mix. reckons after more then 15 years he had to replace the liner but the rest of the pool was still in great shape.
The Chemicals will mix and your hair will break up and become unstraight
A lot of people do this. the best way to do it is to simply make the hole as close to the right size as you can, Put the pool in it, fill it, then back fill around the pool with a weak sand cement mix.
I know A guy that put one into the ground all the way. It was a powder coat zincalume above ground pool, What he did was. # Dug a hole big enough to set the pool up in. he had a big pool. # he set it up to have the pool sticking 6 inches out of the ground # set up the pool according to the instructions. # His land had a slight slope so the pool stuck out of the ground a little more on one side than the other. # filled it up with water # then back filed around the outside of the pool with a 10/1 sand cement mix. # Et Voila, 20 years later he had to replace the liner. and everything was still ion great condition.
Absolutely do not mix shock with bleach. there are chemicals specifically designed to remove Iron from the water. Ask your pool supply store. Hatawa
Apparently you can I spoke to some one who did this as he was not interested in the hassle of having to remove an in ground pool later on when he got sick of it. The method he used was quite simple. He used a 5' deep above ground pool with powder coat zincalume surround. I forgot the dimensions of the pool but it was pretty big one. # Dig a hole to the depth required he had a fall in the land so he left the top rail of the pool about 4" / 100mm above the ground on the up hill side and ended up about a 1' / 300mm above the ground on the down hill side # make sure the hole floor is level and then cover it in about 4" / 100mm of washed river sand. # Build the pool inside the hole. # install necessary plumbing. # Fill the pool. # After the pool is full of water back fill the gap between the pool and the ground with a 10 to 1 mix of sand cement. He told that this lasted him 20 years at which time the liner needed replacing when he took the old liner out he found that the rest of the pool was still in top condition.
Apparently you can I spoke to some one who did this as he was not interested in the hassle of having to remove an in ground pool later on when he got sick of it. The method he used was quite simple. He used a 5' deep above ground pool with powder coat zincalume surround. I forgot the dimensions of the pool but it was pretty big one. # Dig a hole to the depth required he had a fall in the land so he left the top rail of the pool about 4" / 100mm above the ground on the up hill side and ended up about a 1' / 300mm above the ground on the down hill side # make sure the hole floor is level and then cover it in about 4" / 100mm of washed river sand. # Build the pool inside the hole. # install necessary Plumbing. # Fill the pool. # After the pool is full of water back fill the gap between the pool and the ground with a 10 to 1 mix of sand cement. He told that this lasted him 20 years at which time the liner needed replacing when he took the old liner out he found that the rest of the pool was still in top condition.
It is not sensible to mix bleach and chlorine, or any other cleaners, especially as the question appears to be about a swimming pool? It has been known that, potentially, the gas given off, when chemicals are haphazardly mixed can cause death! Always read the labels and use household cleaners and swimming pool chemicals - carefully.
No, you should never mix pool chemicals together unless you are certain they are compatible, as doing so can create dangerous reactions. For example, mixing chlorine with acids can produce toxic gases, while combining different chlorine compounds can lead to harmful byproducts. Always follow the manufacturer's instructions and consult safety guidelines when handling pool chemicals. It's best to add them to the pool separately and allow time for proper circulation.
Chlorine: either in the form of tablets(99%) or liquid (12.5%). OR Bromine but you still should use some liquid chlorine even with this. Muriatic Acid, CYA = cyanuric acid/conditioner Other items you may need or have to use depending upon how you maintain your pool: Soda ash, algaecide, tile cleaning soap, water clearifier. etc., etc.
how to mix the chemicals with wick for color full flame
When working with pool chemicals, it is important to wear appropriate protective gear such as gloves, goggles, and a mask to prevent skin and eye irritation. Always follow the manufacturer's instructions for handling, storing, and disposing of pool chemicals to minimize risks of accidents or chemical exposure. Additionally, never mix different pool chemicals together, and store them in a cool, dry, and well-ventilated area away from other household chemicals.