red (rare), metallic green, blue, light blue, brown, lime green, yellow, silver, black, gray, purple (rare).
Film capacitors cannot be replaced with ceramic or mica capacitors if used for analog signal processing. However, mica capacitors can be replaced with ceramic capacitors in general.
Mostly the leakage of capacitors is due to the resistor.
A: practically all capacitors will have an indication of polarity, it maybe a bar or sign or even a color code to signify the potential polarity to be applied to that terminal. There are however non polarized capacitors that will allow either polarity to be applied to either terminal
Capacitors store charge. There are many applications for their use. There is no set amount of capacitors in a circuit since it is application dependent.
Resistors, capacitors, inductors, diodes are all passive components.
simpleton
That would depend on your soldering skills. If you aren't confident in your ability to solder, then no, it will not be easy.
Yes..... its like the resistor color code
The common name is electronics or microelectronics. These resistors, diodes, capacitors, and integrated circuits (chips) are typically mounted on cards or a "motherboard."
It could be, but you will have to be careful about your SATA ports, and the tall capacitors. They are ok bending, but bend them too far and they will destroy your motherboard. Also, you will be best off not using your PCI slots, for the sake of cooling.
Its normally a sign of a faulty motherboard, if you look at the capacitors on the motherboard itself, they could be swollen or leaking. Ive seen this many a time.
The capacitors those are polarity sensitive are called electrolytic and tantalum capacitors. These capacitors are labeled as positive and negative.
Computer motherboards can be damaged by a number of things. Such things include age, physical abuse, moisture, heat, static discharge, power surges, and lightning strikes. A motherboard contains capacitors, and when the board ages, its capacitors can explode, swell, or leak. Power surges and lightning are bad for any electronics devices. Heat is an enemy which can destroy semiconductor components. Moisture is another possible problem, and if it condenses inside of the ICs, they may explode, just like how popcorn works.
Capacitors are rated in Microfarads
because normal capacitors does not have any polaririties.
Film capacitors cannot be replaced with ceramic or mica capacitors if used for analog signal processing. However, mica capacitors can be replaced with ceramic capacitors in general.
Mostly the leakage of capacitors is due to the resistor.