Want this question answered?
The 'fader' setting on the stereo may be set to 'rear'. The front speaker wires may be damaged or disconnected from the stereo or speaker.
easy
You could look at used car lots to find a 1999 Peugeot. You could also look in used car magazines and in the classified section of newspapers.
There are numerous wires on the back of the radio including powers, grounds, speaker, antenna, CD changer controls, computer communication, etc.
Try to use Toyota speaker adapter plugs so you don't need to cut wires and mess the electric system up. You can get them from Ebay or Amazon.
The 106 GTI Peugeot vehicle was in production from 1996-1999 as a French vehicle. The original Peugeot vehicle was first introduced in the fall of 1991.
£160
dead connection in the speaker leads if you have a dmm (multimeter) test the wires to see if any signal is sent
Answer6.5" speakersTry to use the Nissan speaker adapters plugs so you don't need to cut wires and mess up the electric system, you can get those from eBay or amazon.
When changing the spark plugs, it is important to leave the correct sized gap. For a 1999 Peugeot Zest 3 the spark plug gap is 0.8mm + or - 0.1 mm.
it is a 9 inch diameter speaker
The service light is a little spanner which stays illuminated on main display on start up of the engine, this is a simple reset if home servicing and no diagnostic plug in from dealer necessary.Procedure to Reset Peugeot Service Light as follows:1. Switch the Ignition Off2. Press and hold the trip meter (mileage reset) button on the dash3. Now switch the ignition to the ON position4. Keep the button pressed for 10 seconds5. The display will read '0' and the service symbol will extinguish. Works on most models of manufacturer, for example.Peugeot106(1999 on)Peugeot 206 (1998 on)Peugeot306(1996 on)Peugeot307(1996 on)Peugeot406(1998 on)Peugeot607(2000 on)Peugeot806(1999 on)Peugeot Expert (1999 on)Peugeot 807 (2002 on)Peugeot Partner (1999 on)Peugeot Boxer (2002 on)