red
Theodore H. "Ted" Maiman at Hughes Research Laboratories on May 16, 1960
does the ruby laser treat bolld vessels
Not usually. Laser pointers are usually diode lasers.
Rubies are hard...on the hardness scale they are next to diamonds with a hardness of 9.0...A ruby laser is a solid state laser that uses a synthetic ruby crystal as its medium. Ruby lasers produce pulses of visible light and deep red color....They are used in a number of applications where you need short pulses of red light...for making holographs...and tattoo removal
the coulor of ruby is red
The first practical laser was developed by Theodore H. Maiman in 1960 at Hughes Research Laboratories. He used a synthetic ruby crystal to produce a red beam of light.
Helium neon laser is better than ruby laser or most of the four level lasers are better than three level lasers due to the following reasons: The laser output is continuous in the case of helium-neon laser. But it is in the form of pulse in the ruby laser. Ruby laser requires high power pumping source, whereas Helium-neon laser requires low power pumping source like electric discharge. Efficiency of helium-neon laser is more than ruby laser. The defects due to crystalline imperfections are also present in the ruby laser. But it is not so in the helium-neon laser.
Mirrors are used in ruby and He-Ne lasers to create an optical resonator cavity for the laser to oscillate and produce coherent light. The mirrors reflect the emitted light back and forth within the cavity, amplifying the light through stimulated emission process. This process helps to establish the necessary conditions for laser action, where the light waves are aligned and reinforced to produce a powerful coherent beam.
1.he-ne laser is gaseous state. Ruby is solid state laser. 2.he-ne laser requires electrical pumping. ruby laser requires optical pumping. 3.he-ne laser has 4 energy levels. ruby has 3 energy level. 4.he-ne laser gives continuous output. ruby laser gives output in form of pulse 5. he-ne laser is cheaper
A ruby laser is a red laser with a wavelength between 694 nm and 628 nm. 1 nanometer = 1×10−9 meter.
laser production is done by a solid state active working material.
Because the red ruby laser is the cheapest. Green lasers are usually more expensive. And the blue lasers found in blu-ray players are even more expensive.