RouterC#copy running-config tftp [copy run tftp]
What is the purpose of using the copy tftp flash command on a router? to back up the current IOS image to a server to restore the IOS image from a server to back up the router configuration to a server to restore the router configuration from flash
RouterC#cpoy tftp running-config [ cpoy tftp run ]
The DHCP server will not issue the addresses ranging from 10.10.4.1 to 10.10.4.5
The DHCP server will not issue the addresses ranging from 10.10.4.1 to 10.10.4.5.
The DHCP server will not issue the addresses ranging from 192.168.24.1 to 192.168.24.5.
To save the current running configuration you can use the "copy run start" command. Any configurations that are made on a router will not be saved until you use this command and it will save the current running configuration to the local NVRAM. This configuration will then be used on next startup. To back up we can save the configuration to a remote TFTP server with use of the "copy run tftp" command. Always have a back up plan.
Open a command prompt window then type in ipconfig/all Then there should be your dns server.
go to sql command prompt.
This command will allow you to copy a configuration from a TFTP server to the running configuration of a Cisco device. When you issue the command you will be prompted for further details about the TFTP server. The new configuration will replace the active one (or running configuration) and make any necessary changes.
This command will copy the running configuration (located in RAM) of a Cisco device to a TFTP server. After executing the command you will be prompted for further information about the TFTP server (Server Address, file name, etc.).
Usually modems do not require any configuration. But your router has to configures to get external IP from a DHCP server or whatever your internet provider is using.
Command prompt: iscsicli FirewallExemptiSNSServer