0
What else can I help you with?
Which command when issued in the interface configuration mode of a router enables the interface to acquire an IPv4 address automatically from an ISP when that link to the ISP is enabled?
In the interface configuration mode of a router, the command ip address dhcp enables the interface to acquire an IPv4 address automatically from an ISP via DHCP when the link to the ISP is enabled. This command instructs the router to request an IP address and other configuration information from a DHCP server. After issuing this command, ensure that the interface is also enabled with the no shutdown command.
What will be the result of adding the command ip dhcp excluded-address 172.16.4.1 172.16.4.5 to the configuration of a local router that has been configured as a DHCP server?
The DHCP server will not issue the addresses ranging from 10.10.4.1 to 10.10.4.5
What will be the result of adding the command ip dhcp excluded-address 10.10.4.1 10.10.4.5 to the configuration of a local router that has been configured as a DHCP server?
The DHCP server will not issue the addresses ranging from 10.10.4.1 to 10.10.4.5.
What will be the result of adding the command ip dhcp excluded-address 192.168.24.1 192.168.24.5 to the configuration of a local router that has been configured as a DHCP server?
The DHCP server will not issue the addresses ranging from 192.168.24.1 to 192.168.24.5.
What command enables a DHCP relay on a Cisco router?
hal-loosi
A system is currently having Public ip address How can you assign it to private ip address?
You have to install a router with a DHCP server option on. In that way the public address will be assign to the router and your PC will get a private ip address from the DHCP server.
What is the IP address of the DHCP server?
DHCP server must be assigned a static IP address...On a Windows computer you can find out the IP address of the DHCP server that assigned your current IP address by opening a command prompt and typing "ipconfig /all".
Changed the ip address on your belkin n1 router and now cant access settings can anyone help?
If you have changed DHCP ip range, the ip address for your router has changed too. You can find your router ip address in your wireless adapter information.
What is DHCP scope and why it is required?
DHCP Gives four piece of information that are required in a network today. The four piece of information are IP address of computer , IP address of router , Subnet mask and IP address of name server. DHCP is a dynamic host configuration protocol and is backward compatible with BootP.
What is dhcp scope and why is it required?
DHCP Gives four piece of information that are required in a network today. The four piece of information are IP address of computer , IP address of router , Subnet mask and IP address of name server. DHCP is a dynamic host configuration protocol and is backward compatible with BootP.
How do you set DHCP range for at least 12 computers on a router?
Depends on your router. usually you just enable DHCP. Then tell it the starting address is 192.168.x.x and finishing address is 192.168.x.x and give a lease time and then maybe any exclusions you may want for something that's static.
How do you find your dhcp server id?
You haven't indicated what operating system you are using. For windows, using the 'ipconfig /all' command will show you what the DHCP server address is.
