0
What components should be deactivated when installing a cable modem?
Wiki User
∙ 11y ago
Which components should be deactivated when installing a cable modem
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
When installing a new monitor what should you do first?
Determine what type of cable is compatible with your video card
When installing power antenna in 1999 Nissan Pathfinder do the teeth in cable face towards front or rear?
The cable teeth should face towards rear.
When installing a local printer attached through a parallel cable what port should you specify?
LPT1 : (Recommended Printer Port)
When laying out the high voltage cable as it is coming off the cable reel pallet assembly how much additional cable should you pull out beyond its expected final position for installing elbow and cabl?
10 feet
How do you hook up the kickdown cable to the carb It is a 2 barrel?
There should be a small ball type stud that is connected to the throttle linkage, beyond the throttle cable. The detent cable should push into that ball and stay fit there. Make sure you have the correct holding bracket for the detent cable and adjust the cable after installing if need be.
The Right Specs for the Cable?
Unless you are an individual that is a serious audiophile, the brand of an A/V cable should normally not matter. What is important would be the specifications of the cable and if it will work with the particular components. The length of the cable should be reviewed as well. As long as the cable is the correct one and it is long enough, there is usually no need to worry about manufacturer.
I purchased a used General Instrument cft 2200 cable box and when connected to the T.V Your Teminal Has Been Deactivated is displayed. Is there a quick fix for my problem?
Your terminal has been deactivated means that the Jerrold CFT 2200 cable box needs to be re-activated. To re-activate a locked receiver you need to get a service code generator or SCG programmer. The SCG programmer will send activation codes into the General Instrument CFT 2200 cable box and reset the unit back to normal. At that point the Your Terminal Has Been Deactivated message will leave the television screen and you should be able to use the cable box as a tuner or whatever you decide to use it for. Having a SCG Programmer can remove any error code from the General Instrument CFT 2200 cable box.
Which safety precaution should an installer take when installing cable in the ceiling of a building?
Wear thick gloves to minimize damage to the cable.Wear a shirt with short sleeves to avoid getting stuck in the cable supports when installing.Wear lightweight shoes when installing cable runs inside the ceiling.Wear safety glasses in case of encountering toxic materials during the installation.I don't know :)
How do you install the gear shift cable on a 1991 camaro?
easy by installing it
What cable to you connect first when installing a car battery?
red or positive
What type of cable should be used for a very fast network?
Optacal fiber cables are the fastest network cables in which the signals are transmiited nearly at the speed of light. they are very expesive because they are made of fiber glasses.
Which two steps should be performed when installing a peripheral device?
Connect the peripheral using an appropriate cable or wireless connection. AND Download and install the most current driver.
