0
What else can I help you with?
Why half size of neutral conductor in 3.5 core cable?
In a 3.5 core cable, the neutral conductor carries less current compared to the phase conductors. By reducing the size of the neutral conductor to half, it helps balance the voltage drop and prevents overheating in the cable. This helps ensure the safety and efficiency of the electrical system.
What is the maximum number of no10 wires that can enter a 4 x 1 and a half octagon outlet box?
six
What happens to the resistance of a conductor when the length of the conductor is reduced to half?
If the length of the conductor is halved, the resistance of the conductor also decreases by half. This is because resistance is directly proportional to the length of the conductor. Shortening the length leads to fewer collisions between electrons and reduces the overall resistance.
Difference between 2 core wire and 4 core wire?
in 4 core cable all four cables are equal dia and in a 3.5 core cable 3 cores are equal dia and fourth one will be with half dia. and it is used for neutral in 3phase 4 wire syastem
What are the small pores found in the leaf scar?
The small circles/ pores (although they are not really pores) are the scars of the xylem and phloem tubes that were joining the leaf to the stem. Imagine cutting an electrical cable in half, if you look at it from the side you will see the cross section of the individual wires that were running through the cable
If conductor is cut half of its length will it affect its conductance?
Cutting a conductor in half will not affect its conductance, as conductance depends on the material and its properties, not its length. Conductance is determined by the material's ability to allow the flow of electric current.
What happens when doubling the area of a conductor?
Doubling the area of a conductor reduces the resistance by half. This is because resistance is inversely proportional to the cross-sectional area of the conductor. Therefore, doubling the area reduces the resistance, making the conductor more efficient in conducting electricity.
How do you terminate RJ 45?
To terminate an RJ45 connector, first, strip about 1 inch of the outer insulation from the end of the Ethernet cable using a wire stripper. Untwist the pairs of wires and arrange them according to the T568A or T568B wiring standard, ensuring correct color order. Trim the wires to about half an inch, insert them into the RJ45 connector, and use a crimping tool to secure the connector onto the cable, ensuring each wire makes contact with the metal pins. Finally, test the connection with a cable tester to ensure proper termination.
Can the Oakley Half Jacket earsocks fit the Oakley wires?
No it cannot, the Half Jacket's earsocks are too large.
How many number 12 thhn wires can fit in half inch PVC electric conduit?
The National Electrical Code (NEC) provides guidelines for conduit fill calculations. For half-inch PVC conduit, you can typically fit about 6 to 7 number 12 THHN wires. However, the exact number may vary depending on factors such as the specific type of insulation and the installation conditions, so it's always best to refer to NEC tables for precise calculations.
What is an easy way to tell a current floppy drive ribbon cable from an EIDE cable?
The floppy drive cable would be about half the width than the other.
What is the correct size of main bonding conductors for a tn-s system having 25mm phase?
By rule of thumb, the neutral conductor is half the size of main conductor.
