Want this question answered?
HDMI is currently the only single-connection cable that combines both Audio and Video.
Yes, you would use only one of the video connectors at a time. The reason some monitors have different video connectors is to allow it to connect to a number of different video cards. If you have a DVI or HDMI connector on both the motherboard or video card and the monitor, then use it, and if not, use the VGA connector. Just use the one that is on both the computer and the monitor, and if you have both, just use the one you prefer.
There are two common connections for domestic video that carry both video and audio. In Europe, the SCART connector has been popular for may years. It is a 21 pin connector that carries SD video with stereo audio. In a fully wired connection, it also carries return video and audio signals. The connector also handled control lines to integrate control of players and televisions. The connector has made little impact in North America and is now being replaced in Europe by HDMI. HDMI is a digital video interface that also carries video and audio. It handles SD, HD and computer display formats. It is compatible with digital DVI connections although DVI does not support audio.
Both the source and the TV have to have a HDMI connector. If they don't, use the S-connector. No S- connector? you will have to use the VIDEO connection on the TV.
Step1 Locate the Ethernet ports on bothcomputers. These ports are normally on the rear face of the computer.computers. These ports are normally on the rear face of the computer.Step2 Connect one end of your Ethernet crossover cable to one of the computers using the Ethernet connector. This connector is called an RJ-45 connector and looks like an oversize phone jack.Step3 Insert the opposite end of the crossover cable into the Ethernet jack on the other computer, ensuring a firm fit.Step4 Check your network connections within your operating system to ensure both computer's Ethernet controllers have successfully negotiated a network connection.
A HDMI cable will send audio and video down one cable.
A HDMI cable will send audio and video down one cable.
Ethernet Cables are cables with 4 or eight conductors that connect to an RJ45 connector on both ends. They come in a variety of colors and must be no longer than 100 Meters. 10BaseT and 100BaseT use pins 1,2,3 & 6 GigE uses all 8 wires. Generally all current Ethernet cables come with all 8 wires now.
Ethernet is bi-directional; it both transmits and receives data.
It is both. For more info. try this link: http://t1rex.blogspot.com/2007/12/what-is-ethernet-wan.html
INPUT
Audio and Video cables, red and white for audio and yellow for video, if both units have a S-connector use it. The S-cable is a better video cable. If you use a S-cable you don't use the yellow video cable.