Short in switch or wiring. Get this repaired ASAP or you may have a fire. answer replace light switch
Not sure about L1 but 1L could be the Emergency Power off switch is pressed or the throttle moved before the deadman is pressed
The brake lamps on a 1999 Chevrolet Prizm may stay on due to a faulty brake light switch, which is typically located near the brake pedal. If the switch is stuck or malfunctioning, it can cause the brake lights to remain illuminated even when the pedal is not pressed. Additionally, issues with wiring or a short circuit in the electrical system could also contribute to this problem. It's advisable to inspect the brake light switch and wiring to diagnose and resolve the issue.
The light should be controlled by a switch operated by the emergency brake handle. The switch could be out of adjustment or could be bad.
There are a few causes to whining brakes in a car. One reason could be that the caliper is out, and another could be that the pad is worn out.
If the mirror is not working when the switch is pressed, it could be due to a blown fuse, a faulty switch, or a broken connection in the wiring. Additionally, the mirror's motor might be malfunctioning or jammed. Checking the electrical connections and testing the fuse can help identify the issue. If these components are functional, the mirror itself may need repair or replacement.
If none of them are working then you could have a master switch or relay defective.
bad switch is usually the culprit bad switch is usually the culprit
There is not a fuel shut off switch on a Chevrolet. Are you sure you aren't getting fuel? You could have a bad fuel pump. While cranking the engine, have someone beat on the bottom of the fuel tank. If it starts you have a bad pump.
The rheostat on the headlight switch is bad.
Overdrive switch is located on the gear shift stick, just below the handle. You could toggle with your right thumb to see if the O/D light comes on when pressed.
Brake light switch runs through your headlight/turn signal seitch in steering column. This switch could be malfunctioning.
It sounds like the main switch is malfunctioning and it should be replaced.