Want this question answered?
AC stands for alternating current and means that the current changes directions, flipping repeatedly from positive to negative and back again.DC means direct current, the current only flows in one direction and does not change polarity.
The polarity at which it limits a waveform.
Immediate and catastrophic destruction of transistors and/or diodes. While that does not ALWAYS occur, it's certainly possible. Start with the alternator. No doubt those diodes have been destroyed if a battery has been connected with reverse polarity.
HZ. Hertz is the name given to the frequency of the alternating circuit. Direct current (DC) has no frequency since one wire is always positive and the other is always negative; but AC (Alternating Current) rapidly changes polarity, and does so at a rate that is defined by HZ.
as direction of current reverses it is shown in form of positive and negative cycles
-- negative polarity -- positive polarity
goes from negative to positive
Polarity is the direction of flow of electrons throughout a circuit. There are two types of polarity: positive and negative. Postive polarity is of older circuits which means electrons flow from positive to negative. Negative polarity is of more modern circuits and that is the flow of electrons from negative to positive such as on car batteries
Normal polarity is for the power to normally go from positive to negative, reverse polartity is to change the positive to a negative and the negative to a positive so the power goes the other way.
The polarity of a circuit is dependent upon the type of circuit. Direct current circuits have one negative pole and one positive pole and they flow in one direction. Alternating current circuits the electron flow reverses because the tow poles alternate between negative and positive.
Current means flow. Electric current means flow of electric charges Now there are two kind of charges. They are positive and negative But current is defined as the flow of positive charges But in metallic wires there is no chance for positive charges to flow through. Only loosely bound electrons with negative charge are capable of flowing. So current is case of metallic wire is due to electrons. So we have to assign as "conventional current". Conventional current is always opposite to the flow of electron flow Now from a battery current (conventional) flows right from positive polarity to the negative polarity. But within batter is has to flow right from negative to positive so as to complete the circuit of flow.
no there is no consideration of positive or negative legs in case of resistor.
Basic transistors have three lead contacts that do have polarity . There are two kinds referred to as P-N-P (for positive-negative-positive leads) and N-P-N (for negative-positive-negative leads).
both
the way in which the positive & negative terminals on the battery or power supply are attached to the electromagnet. switching the leads from the positive terminal to the negative one, and the negative one to the positive terminal should reverse the polarity of your electromagnet.
'Polarity' has a number of meanings, generally involving the distinction between positive and negative.
The polarity of both ends of a magnet is different. The positive and negative polarity exist for a magnet.