Round and Round
You put the key in the ignition and turn it clockwise
2.9 litre straight 6 cylinder
To reset the check engine light on a 1994 Volvo 960, you can disconnect the battery by removing the negative terminal for about 10-15 minutes. This will clear the engine codes and turn off the check engine light. Alternatively, you can use an OBD-I scanner to read and clear the codes. Always ensure any underlying issues are addressed before resetting the light.
The weight of a Volvo 960 engine typically ranges from approximately 350 to 400 pounds (159 to 181 kg), depending on the specific configuration and components such as the transmission and accessories. This weight can vary slightly based on the engine variant, as the Volvo 960 was offered with both inline-six and V8 engines. For precise specifications, it's best to consult the manufacturer's documentation or a service manual.
The Volvo 960 typically does not come with a turbocharged engine; it is equipped with naturally aspirated inline-six engines. However, some variants of the Volvo lineup from that era, like the 850, offered turbocharged options. If you're looking for a turbocharged performance, you might want to explore other Volvo models or consider aftermarket modifications for the 960.
To reset the service indicator light on a 1997 Volvo 960, turn the ignition key to the "II" position without starting the engine. Press and hold the odometer reset button until the display shows "0." Release the button, then turn the ignition off and back to the "I" position. The service light should now be reset.
i need the code to unlock the radio on my Volvo 960 1996
take off the tray covering the bottom of the engine and its at the front
if you have to ask please dont even try it get someone who knows cars to do the job
The lug nut torque for that 1993 Volvo 960 is 63 ft.lbs.
The cylinder order for a 1997 Volvo 960, which has a straight-six engine, is 1-5-3-6-2-4. This means that the cylinders are numbered from the front to the back of the engine, starting with cylinder 1 at the front on the driver's side. The firing order is crucial for engine performance and timing.
Its in the emergency flasher module in the dash. The module is the same as the switch you toggle to turn the emergency flasher on/off.