If you want to change down in some cars you need to slow down a bit in order to do it.
In many auto trans cars you have to depress the brake pedal to take the car out of 'Park'.
If the brakes are out then you have no business putting it in any gear because it is unsafe to drive a car with no brakes.
keeps you from putting car in gear unless brakes are pushed. I have been doing that wanting to put the truck in gear but it is not happening. It is still stuck in park.
keeps you from putting car in gear unless brakes are pushed. I have been doing that wanting to put the truck in gear but it is not happening. It is still stuck in park.
Dirty brake pads could cause a car to make a squeaking noise when putting the car in gear or when releasing the brakes. Cleaning, sanding, or replacing the brake pads should make the sound stop.
It's the gearshift unlock switch, so you can't put the car in gear without putting the brakes on.
putting it on gear 6
Second gear. Using the brakes on a downgrade is very hard on them and can (frequently does) lead to early brake failure. You may need to use your brakes a bit on a steep downgrade, but a lower gear is the better choice.
we have to put the gear to neutral and apply brakes, and start the car.
Coasting requires you to put the gear into neutral and let the car freewheel down the hill. If you came to a bend on the hill and someone was speeding up the hill, you may not have enough time to react and slam on the brakes, or slow down. When you aren't in gear, you have less control of your car, as opposed to if you was in gear. E.g. If you were in gear and slammed on the brakes, your car would stall, jerk you forward and stop, however because you aren't in gear, your car won't stop rolling.(It's why you can push your car when it's out of gear, but you can't push it when it's in gear).
Sounds like to low an idle speed.
The Belta is a small car made by Toyota it was first produced in 2005. It has a sports mode, you can choose by putting your car into the S gear.
bad transfer case