0
What else can I help you with?
What is a fork motorbike's?
Fork motorbike is a bike that connects a motorcycle's front wheel and axel to its frame, typically via a pair of triple clamps. It typically incorporates the front suspension and front brake, and allows the bike to be steered via handlebars attached to the upper triple tree.
How do you lower a 4 wheel drive ford ranger?
Smaller and stiffer shocks/springs on the front, remove a leaf spring or 2 on the back and get stiffer shocks/leafs back there as well.
Can you put regular shocks on your 1989 fleetwood cadillac?
Yes, but you need to also change to stiffer springs.
You eat cow with a fork?
you cook it than you eat it with a spoon,fork or knife !
Why do you call the fork a fork?
Rice Fork Eel River goes by the geological phenomenon of Crabtree Hot Springs, and forks the Eel River downstream.
What is the fork oil capacity for a klx110?
3.5" of 5W fork oil for stock KLX 110. This is without the springs.
What is the characteristics of springs with large spring constant in hooke's law?
larger the spring constant of a spring, the more stiffer it is.
How do you change a motorbike fork seal?
To change a motorbike fork seal, start by removing the front wheel and fender, then loosen the top and bottom triple clamp bolts to detach the fork tubes. Carefully slide the fork tubes out and use a seal driver or a similar tool to remove the old seals. Clean the fork tubes, install the new seals, and reassemble the forks by reversing the disassembly process, ensuring everything is tightened to the manufacturer’s specifications. Finally, refill the forks with the appropriate oil before reattaching them to the bike.
What is the fork oil level for 2003 Honda cbr600rr?
110MM air gap from top of fork leg fully compressed with the springs out
How much oil in a suzuki gs 750 fork leg?
229 millimeters (9.0 in)- cap off top of forks and springs taken out,fully compress fork for measurement. Fork must be in vertical position for measurement. 229 millimeters (9.0 in)- cap off top of forks and springs taken out,fully compress fork for measurement. Fork (must) be in vertical position for measurement.
Will a dyna wide glide front forks fit on a 1200 sporster?
The 39mm Dyna set will definitely fit. If you are trying to put bigger forks along with a Dyna front end, you will still be able to put it on but you can expect a much stiffer ride because of the larger springs in the fork assemblies. Hope this helped!
How do you stiffen front forks on a Honda xr 100 r?
you can buy stiffer front shock springs for about90 bucks at procycle.com
