12-battery disconnect, direct battery input to pcm was disconnected within last 50 key-on cycles
33-a/c clutch relay circuit, an open or shorted condition detected in the a/c clutch relay circuit
End of message, no more codes, or no codes present.End of message, no more codes, or no codes present.
It is the end code, meaning there are no more codes to flash or show. It is not an error code.
Ignition coil circuit malfunction.
Start with the system off. Press auto, floor and defrost at the same time, unit will enter diagnostic mode, and display any fault codes.
They are viewed with a scan tool.
I would recommend that you get a shop manual for this vehicle. It will tell you how to find the fault codes and what they mean.
Trouble code P0700 means: Automatic Transmission Control System Malfunction You need to check the TCM for codes
On a Chrysler vehicle the engine computer sets P0700 whenever the transmission computer has detected and set a fault. You will need to have transmission codes checked to know possible causes.On a Chrysler vehicle the engine computer sets P0700 whenever the transmission computer has detected and set a fault. You will need to have transmission codes checked to know possible causes.
If you are checking a Chrysler/Dodge 55 is "end of message". It just means that there are no more codes to show. If that is the only code you got , then there are no codes.
Anything and everything, really. What you need to do first is check for fault codes stored in the computer. Chrysler conveniently made them easy to get at. See http://minimopar.knizefamily.net/fault/index.html for a description of how to get them, and what they mean.
Fault codes, or engine codes, for any vehicle can be found in some user manuals. Additionally, a Chrysler dealership would be able to determine what each code means; this information is also published in detailed repair manuals, such as those made by Chilton.
1996 nissan pulsar fault codes