Wet glazing uses some kind of putty or sealant that needs to dry or cure. Dry glazing uses a rubber strip or similar, that goes on dry and stays that way.
"Wet on wet" or "wet in wet" means that you are applying wet paint (usually oil, artist's colours) to a surface that you have already painted which is still wet. If using oil, then your surface would be oil based, such as linseed oil or turpentine. This technique enables you to move and blend the paint to finish a painting in one sitting. "Wet on dry" means you are applying wet paint to a dry surface that you have painted earlier and allowed to dry. You can do this to either build up an area, or as in glazing, to achieve certain effects.
A wet edge is a decorative arts term (faux finishing). It applies to the glazing process. The artist, while applying the glaze, works in sections on a wall. They must make sure that the glaze does not dry on the outer edge in order for it to be joined to the next section. If it does dry, the result is a "dry edge" that creates a line and ruins the entire look of the faux finish.
Painting on dry plaster as opposed to painting on wet plaster. Painting on wet plaster is more permanent because the paint is infused with the plaster.
A dry and wet bulb thermometer works via being moisturized in conjunction with a wet cotton swab which would evaporate. From there, the temperatures are recorded before more recordings for other temperatures are done with a psychometric chat regarding one's findings with the dry and wet bulb thermometer.
dry it out
"Wet on wet" or "wet in wet" means that you are applying wet paint (usually oil, artist's colours) to a surface that you have already painted which is still wet. If using oil, then your surface would be oil based, such as linseed oil or turpentine. This technique enables you to move and blend the paint to finish a painting in one sitting. "Wet on dry" means you are applying wet paint to a dry surface that you have painted earlier and allowed to dry. You can do this to either build up an area, or as in glazing, to achieve certain effects.
It means both, depending on how you look at at it. But if wet & dry is not acceptable then just put wet.
Wet means the amp sound has effects, while dry is no effects.
A wet edge is a decorative arts term (faux finishing). It applies to the glazing process. The artist, while applying the glaze, works in sections on a wall. They must make sure that the glaze does not dry on the outer edge in order for it to be joined to the next section. If it does dry, the result is a "dry edge" that creates a line and ruins the entire look of the faux finish.
when you're not wet, lubricated anymore
Something that is damp or emptiness. These two things are not wet or dry.
Wet they cut wet after shampoo-dry they cut it dry
The wet foot dry foot policy was when the Cubans try to make it to the US.
If by dry steam you mean superheated steam then dry steam because it has a higher calorific value
The savanna can be dry or wet depending on the climate
tropical wet at dry savanna
Its call sedimentry and metamorphic. Look 'em up!