regular brake fluid dot 3 pretty sure. call a part store to find out exactly
It's going to look like your power brake reservoir. It is the reservoir for your clutch slave cylinder.
Right at the clutch master cylinder reservoir under the hood.
It uses brake fluid in the brake fluid reservoir. The clutch fluid (brake fluid) is fed by the brake fluid reservoir. The clutch fluid reservoir is just beneath the brake fluid reservoir. So, add fluid to the brake fluid reservoir to fill the clutch fluid, also.
In the break reservoir i believe
The clutch master cylinder gets it's fluid from the master brake cylinder reservoir. The clutch is below the brake and gets it's fluid by gravity. If you need fluid just add to the brake reservoir.
Look near the brake master cylinder for a reservoir or your brake fluid and clutch fluid might share the same reservoir
it has a cable. will not have a clutch reservoir
You add fluid to the clutch reservoir. If it is empty, you have a leak and probably got air into the system. Proper repairs should be done to correct the problem.
I BELEAVE THE BRAKE FLUID RESERVOIR AND CLUTCH FLUID RESERVOIR ARE ON IN THE SAME.
the clutch is setup to a mechanical clutch cable line. there is no reservoir.
The clutch hydraulic fluid reservoir for a Mazda 121 is located next to the brake booster and brake master cylinder. The reservoir is small and round and is close to the driver side fender.
no