where do you add clutch fluid on a Mazda 1997
you dont add clutch fluid. If the clutch is slipping that means that you need to buy a new clutch
where do you add clutch fluid to 1999 nissan maxima
there isn't clutch oil only transmission and engine oil
It uses brake fluid in the brake fluid reservoir. The clutch fluid (brake fluid) is fed by the brake fluid reservoir. The clutch fluid reservoir is just beneath the brake fluid reservoir. So, add fluid to the brake fluid reservoir to fill the clutch fluid, also.
To fill the clutch fluid on a Mazda Miata, locate the clutch master cylinder reservoir, which is typically found near the driver's side of the engine bay, close to the brake master cylinder. The reservoir usually has a translucent plastic body, allowing you to see the fluid level. Remove the cap, add the appropriate type of brake fluid (usually DOT 3 or DOT 4), and ensure the fluid level is between the "MIN" and "MAX" marks. After filling, securely replace the cap to prevent contamination.
You add fluid to the clutch reservoir. If it is empty, you have a leak and probably got air into the system. Proper repairs should be done to correct the problem.
clutch master cylinder right next to brake fluid, the smaller one
The fluid for the clutch comes from the brake fluid. After the brake master cylinder, there is a clutch master cylinder which takes fluid from the brakes. Fill up the Brake master cylinder.
In the master cylinder
well you have to put the clutch fluid down the tube that leads to the water tank! however dont add to much!!!my dad's a mechanic!
85 Lude, old school cable clutch... No hydraulics (fluid)