I found the owners manual for the 2003 mazda b2300 and it shows the fuses and what they are. http://www.manualowl.com/am/Mazda/2003-B2300/Manual/798
You don't use clutch fluid for a manual transmission vehicle.
You can find the fuse box diagram for a Mazda b2300 pickup when you do not have the manual by writing or calling the manufacturer for the original manual.
mazda mechanic says no,at least with my problem.possible,it could be air in fluid?check small fluid reserve on drivers side,by fuse box.it does say to use brake fluid in this reserve.
30 thousands........
I would guess you are low on transmission fluid.
Refer its wners manual or Simply, take it to the mechanic.
go on bing.com
Is your radiator fluid full?
it goes in the dip stick tube.
To remove the clutch from a 1995 Mazda B2300, first, disconnect the battery and remove the transmission by unbolting it from the engine and removing any associated components such as the driveshaft and shift linkage. Once the transmission is out, unbolt the pressure plate from the flywheel and remove the clutch disc. Finally, inspect the flywheel for any damage before replacing the clutch components and reassembling the transmission.
Rcommended manual transmission lubricant type: MERCON automatic transmission fluid - Haynes Repair Manual #36071, 1994-2005 Mazda Pick-ups B2300, B2500, B3000, B4000.