anoid
the term that means two sides are involved.
if a machine has an exposed pulley and conveyor but the portion of ot that is exposed is well underneath the machine the employer
Commissioning of a machine - means that a machine is installed, connected and put to its intended use. However it involves the following : 1. Buying the machine for the purpose, with correct specification 2. getting the machine to the location where it needs to be used. 3. Place the machine exactly in its point of use. 4. Connect the services needed for the machine - it may need suitable electrical connection, suitable water, steam, air, and other pipe lines, etc depending upon the type of machine, use of the machine, purpose of the machine. 5. Once the machine is in place, connected with its service lines as above, you need test the machine for its intended operation. First you test charge the machine, check the connections, dry run with out the product, then after confirming that all its functions look safe, in line with specification and its intended use, you take the real product and try with initial, test speed / slow speed etc. This way you complete the initial checking, test, dry run and product run and then declare that the machine is ready to run for its purpose and hand over the machine to its enduser. You may need need to provide the training also to the end user, operators, technicians, owner to ensure safe, reliable use. Also hand over all the machine related documents to the end user. This process is known as commissioning of the machine.
You can buy a industrial machine guard at www.rockfordsystems.com. You can also get it from www.isecontrols.com
A belt sander is the name for a machine used for removing rough edges.
coumpound machine
what you call a machine that makes clothes is a sewing machine.
both but i rather call it claw machine people call it more that
machine gewehr............................................
holographic machine :P
When you call yourself it goes to the answer machine.
That is an electrocardiograph.
A compound machine, also called a complex machine, consists of two or more simple machines (inclined plane, lever, wheel and axle, and pulley) that work together. The automobile is an example of a complex machine which uses all four simple machines in its operation.
To answer a fax machine, you would need to do one of two things: 1) set the machine to automatically answer a call, so that it picks up after a number of rings. 2) press the "receive" button (often the green button) when the fax mahcine is ringing.
You set the fax machine to automatically pick up the call after a number of rings. If you want to answer the call with the phone, then you would pick up the receiver to answer it.
A counter.
A mechanic.