Want this question answered?
it is 2012 house cost and food are up! People I charge 2.00 a sqft and get it!
Go to youtube & there are tons of how to videos.
Stripping and waxing VCT can cost anywhere between 20-30 cents per square foot depending on the condition of the floor. To scrub and recoat costs about 15-20 cents per square foot.
If its new VCT probably, and you will need to strip the old wax & rinse good so there is no stripper residue.. it eats your new wax over time.... If it ceramic tiles NO.
It depends on the length and width of the floor
It wont accept wax.. sorry
I am not sure how much to charge for strip and wax. It all depends on how much it cost to get.
strip the wax and rewax, or apply mild heat and rebuff the affected area.
the right amount is £70.90
Yes you can install vct over existing vct. The existing vct must be well adhered to the subfloor, no loose tiles or cracked and chipped tiles. If tiles are missing or must be removed you will need to patch in those spots with a suitable portland cement leveler or new pieces of vct. You will need to sand off the wax layer that may be present on the existing vct because if it is left on it can wear loose over time causing adhesion failure of the new vct and glue. Sweep all dust and contaminants from the floor.
Depending on the contractor doing it anywhere from .08 - .50 per sqft. 8 cents is a quick and dirty strip and wax and at 50 cents I would expect to be able to read a newspaper from the reflection. Either way make sure that the contractor you choose is experienced and walk the floor between the end of the strip and before the wax is laid. Any imperfections that you see will show through on the final finish. Also have the floor burnished within a week of finishing to fully harden the wax and maximize the shine.
971.80