0
What do you do if your gas has 9999 min on it and won't go down?
Wiki User
∙ 10y agoWant this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How many min are in 9999 seconds?
166.65 mins
How many hours can you get from 9999 minutes?
With 60 minutes in an hour, do 9999/60 = 166.65 hours, OR 166 hr 39 min
What do you do if a tamagotchi wont hatch?
it will in a couple of min...
How many days is 9999 minutes?
9999min / 60(min/h) = 166.65h 166.65h / 24(h/day) = 6.94 days
How do you get the idle to come down after starting will not return to normal for five to ten min 1990 jeep chrokee?
tap your gas pedel
What is the Definition of flow of gas?
volume of gas in a time periode ; for Example mililiter per minute (ml/min) or liter per minute (L/min) & etc ...
Does gas move fast?
yes i had a gas leake and within 10 min the hole naberhood smelled it
What gas mark do you cook flapjacks on?
Gas mark 4 middle of oven for 20 min = chewy Gas mark 5 Top of oven 25 Min's =crunchy PS always refer to your own oven as times can vary ENJOY
What is wrong with your converter box when it wont manually go from channel 66 down to chanel 6 it stops at 42 and goes back up to 66?
Try unplugging it for one min an plug back in. That should reset it.
On your 95 Ford Explorer you push the gas to the floor and it seems to want to stall you can only push the peddle only 14 way After 30 min of driving if you turn the car off the car wont start?
check the pressure of your fuel pump!
Why do wiper blades stay up when shut off?
this happed to me, take off the plastic cover where the wiper arms ends, it just pops off their is a pin in there that wont go down, just spray it with WD-40 until it is saturated wait a few min. then it will go down.
Gas fireplace wont stay on I have a FMI model GL-6100 gas fireplace when I turn it on after 2 or 3 min it shut down Evan the pilot lite goes out I hear a pop sound that seem to come gas value?
Not an expert, but a homeowner. MOST gas fireplaces (and other appliances) have a flame sensor- frequently in the form of a thermocouple. Intended to prevent gas from flowing when there is no flame present. If the thermocouple is bad, it will shut off the gas flow even when a flame IS present. It may look like a small rod that is in the flame of the pilot light. I would REALLY hand this of to a professional gas repairman. The cost of having this done right is FAR less than the cost of doing it wrong.
