0
What else can I help you with?
Why do all the lights work on my 1986 Caprice except the rear parking?
There is a taillight fuse in the fuse panel.
How do you disconnect rear taillight plug on 2000 Chrysler minivan?
What are the steps to disconnect the plug from the rear taillight plug on a 2000 Chrysler Town & Country minivan?
Why dont your turnsignals horn and taillight work on suzuki intruder?
The fuse. A shorted horn can cause the fuse to break.
How do you change the taillight in a 2003 jeep grand Cherokee Laredo?
Open the rear hatch. you will see 2 screws on the side of the taillight. Remove them and pull the taillight out.
How do you replace a taillight for a 2003 Toyota Tundra?
you dont
How do you replace rear taillight on Mazda 6?
To replace the rear taillight on a Mazda 6, first, open the trunk and locate the access panel behind the taillight assembly. Remove the screws or clips securing the taillight and carefully pull it out. Disconnect the electrical connector and replace the burned-out bulb or the entire assembly if needed. Finally, reconnect the electrical connector, reattach the taillight, and secure it with the screws or clips.
How do you tell what year a dodge coronet is?
if you can't tell by the body style look on the rear taillight as they usually have the year printed in the taillight, such as 68.
Why would one taillight not work when the lights are on but work when the brakes are on?
could be a grounding problem make sure you have a good connection in that taillight
How do you remove the rear taillight lens cover on a 2004 GX 470?
To remove the rear taillight lens cover on a 2004 Lexus GX 470, first, open the rear hatch and locate the access panel inside the trunk area. Remove the screws or clips securing the access panel to reveal the taillight assembly. Unscrew the bolts holding the taillight in place and gently pull the assembly out. Finally, disconnect the wiring harness and carefully remove the lens cover.
How do you change the rear tail light bulb on 2006 Mustang?
* Remove the rear inside trunk finishing panel to access the taillight housing mounting nuts * Free the grommet for the taillight electrical harness and the three taillight housing nuts then pull off the taillight housing * Rotate the bulb socket counterclockwise and pull it out of the taillight housing * To remove the bulb from the socket pull it straight out.To install a new bulb in the socket push it straight into the socket until it stops
Pt cruiser taillight not working?
You might need another taillight if that don't work you might need to see a mechanic.
How do you replace the right rear taillight on a BMW 2000 528i?
To replace the right rear taillight on a 2000 BMW 528i, first, open the trunk and remove the access panel on the right side to expose the taillight assembly. Unscrew the retaining nuts holding the taillight in place, then gently pull the assembly out. Disconnect the wiring harness by pressing the release tab and remove the old bulb from the socket. Install the new bulb, reconnect the wiring, and reverse the steps to secure the taillight assembly back in place.
