could be a grounding problem make sure you have a good connection in that taillight
yes my brake lights dont work First check the fuses, then check the bulbs then check the brake light switch
Check the switch at the brake pedal .
Open tailgate. Remove 2 torx screws in side of taillight. wiggle taillight out, Remove hex screws that hold bulb assembly in taillight. change bulb, Reassemble
replace the break light bulbs?
There is a taillight fuse in the fuse panel.
No brake lights but turn signals work? Turn signal switch brakes route through it.
If the blinkers work then your taillight wiring is bad.
Honda dashboard lights are powered by a single fuse. The taillight fuse keeps the dashboard, taillights and hazard lights safe. If any of this units cause a short all of the components will not work.
A wire may be cut from the brakes. the turn signal wire is still connected
I had the same problem with this and with mine I found out the curcuit board on the back of the taillight needed to be replaced. If you have a late model get it checked out.
we are having back brakes problems
Usually that would be caused by a faulty brake light switch connected TO the brake pedal. If the brakes work the pedal is probably ok.