0
What do you need to have on your air soft rifle if you want a scope?
Wiki User
∙ 12y ago
A rail interface system or a mount on the top
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Where to get a thermal scope in modern warfare 2?
You can get a thermal scope for most guns if not all. The first thing you need to do is get 100 kills with the weapon you want the thermal scope for, then you get the ACOG scope. Once you have the ACOG scope, you have to get 20 kills WHILE LOOKING THROUGH THE SCOPE. Then you will have a thermal scope and enjoy. In my own opinion, get it for a gun that has high range, and one that you would camp with like an LMG or a sniper rifle.
Scope Mounts - Getting what you pay for?
What is a scope mountYou are a hunter, or new to hunting. After finding the rifle you want and the scope you want, you still need to mount the scope to the rifle. Scope mounts hold the scope securely to the rifle.Getting what you pay forBuying a rifle and scope is much like finding a wife, it is strictly a matter of personal taste. Too frequently new hunters will spend exorbitant amounts on the rifle and scope, but skimp on the mounts. This is a costly mistake.The mounts hold your scope securely and help keep your scope true. If you are willing to drop several hundred to thousands of dollars on a scope, the least you should do is consider quality scope mounts. The rifle is only as good as the person behind it, but the finest shooter in the world will miss if the scope is not spot on. Quality, durable mounts will last the life of the rifle, scope and possibly outlast the owner.How to mount scope mountsMore often than not the gun shop where you buy your new rifle will mount your scope for you at no charge. If you are a do it yourself type, here are a few suggestions.Place the bases on the rifle. Check and be absolutely certain they are straight. Tighten them hand tight with the hand tools provided with the mounts. Put your scope in the mounts. Check your eye relief. This is the distance from the optical part of the scope to your eye. Too far and you will not be able to see out of the scope correctly. Too close and when you sight it in for the first time, you are going to have a black eye and possibly need stitches.Once your eye relief is set and you are happy, put the top part of your mounts on your scope. Place the screws in the holes and tighten. As you tighten the screws, tighten each one a bit at a time to be sure the mount is secured evenly. Before the final tighten, check your scope to make sure it is level. Finish and go sight in!
How to install a rifle scope?
Here's the basics on mounting the scope on a rifle. ( Assuming you have a scope mount on the rifle.) 1. Place the bottom half of the scope rings on the rifle first (Without the scope attached.) 2. Place the scope on the bottom half of the rings and adjust the scope mounts to comfortably fit your eye. When adjusted, tighten down the bottom half of scope rings to the rifle mount. ( The scope should have one cross hair adjustment at the top and one on the right.) 3. Place the scope in the rings and then put the top half of the rings on. Tighten them down, but not VICE tight, just loose. You still want to move the scope some. 4. Look through the scope and align the cross hairs level with the rifle barrel. The Vertical line should be straight up and down at a right angle with the barrel. 5. when you have the scope adjusted to your eye and the barrel of the rifle, tighten the top scope rings in a crisscross pattern a little at a time. Don't vice one down then go to the next one. Do it a few turns on each one until they are tight. A final note. If you have a small screw hole and screw at the back end of the scope mount (on the rifle) you may want to place the rear scope ring against that screw. This is a scope stop. This will keep the scope from moving back from the recoil. Some scope mounts have a long pad at the rear of the scope mount that acts the same way. It's usually necessary on high powered rifles not 22's.
Looking for golden eagle scope have rifle?
Gun shop, gun show, want ad, pawn shop
The perfect rifle scope?
Doesn't exist. Depending on what you want to do, there are some that come close, but, you will have to specify your intended use.
Does a Swiss Arms 4x32 rifle scope fit well on an airsoft UTG type 96 shadow ops sniper rifle If not what scope do you recommend?
the scope is not what you want to worry about, it is the scope mounting rings find rings that will fit to your toy and the scope will mount right on , do not expect the toy to shoot dead on because it is a toy not a real weapon . don't shoot your eye out or anyone Else's eye.
What to look for in a rifle scope?
It's all about the optics. When you are looking for a scope you need to look at what you are using it for. The magnification and objective lens size will be the main things to look at. For example you would not want a standard 4 X scope if you plan on hunting varmints or shooting 700 yards at a target. You would want to go with a higher power and a larger objective lens. There are many things to understand when looking for a scope and this is just one thing.
If your rifle shoots to the right which way do you adjust the sights to shoot true?
You will want to make your scope point to the right more.
How do you scope a rifle?
You are asking this question in the Shotgun category, so I must say that you don't scope a shotgun. Here's the basics on mounting the scope on a rifle. ( Assuming you have a scope mount on the rifle.) 1. Place the bottom half of the scope rings on the rifle first (Without the scope attached.) 2. Place the scope on the bottom half of the rings and adjust the scope mounts to comfortably fit your eye. When adjusted, tighten down the bottom half of scope rings to the rifle mount. ( The scope should have one cross hair adjustment at the top and one on the right.) 3. Place the scope in the rings and then put the top half of the rings on. Tighten them down, but not VICE tight, just loose. You still want to move the scope some. 4. Look through the scope and align the cross hairs level with the rifle barrel. The Vertical line should be straight up and down at a right angle with the barrel. 5. when you have the scope adjusted to your eye and the barrel of the rifle, tighten the top scope rings in a crisscross pattern a little at a time. Don't vice one down then go to the next one. Do it a few turns on each one until they are tight. A final note. If you have a small screw hole and screw at the back end of the scope mount (on the rifle) you may want to place the rear scope ring against that screw. This is a scope stop. This will keep the scope from moving back from the recoil. Some scope mounts have a long pad at the rear of the scope mount that acts the same way. It's usually necessary on high powered rifles not 22's. You most certainly can and should scope your shotguns as long as your state allows the use of scopes on them. I have scopes on all of my shotguns, and especially my slug gun!
Looking for firearms international bolt action rifle scope monts?
Try gun shops, gun shows, want ads
Where do you find parts for a J C Higgins Rifle Scope?
E-gunparts.com, gun shops, gun shows, want ads.
Where can you get a scope mount for a Glenfield Model 84 bolt action rifle?
Gun shop, gun show, want ad, pawn shop
