you have to need IC 3 ,bulb
You need a Battery, Light Bulb, Ammeter, Switch.
cant answer
You need a Battery, Light Bulb, Ammeter, Switch.
You need a Battery, Light Bulb, Ammeter, Switch.
yes
first of all, you need a bulb, a wire, and ONE light bulb. You clip the wire on the battery and touch the wire on the bottom of the light bulb
you cant make a potato light up but...you can make a light bulb light up with potato power.all you need is wire electric tape two potato's or lemons set it up and your good =)
The bulb need the correct voltage to operate. Your bulb would light if it is a 1.5 volt light. So the voltage of the supply and the light must be matched. Too little voltage won't light the light, too much will light it too much and blow it up.
To make a light bulb light up, you need a closed electrical circuit. This circuit typically consists of a power source (such as a battery or outlet), wires to carry the electricity, and the light bulb itself. When the circuit is complete and electricity flows through the bulb, it will produce light.
when the glow plug light is flashing during driving it is not the plugs that need replaced it normally means you have a bulb blown most commonly one of your sidelights and once replaced your glow plug light will stop flashing
You can purchase a light bulb at hardware stores, home improvement stores, or online retailers. Look for the type and wattage of the bulb you need, and make sure it is compatible with your fixture.