If you have a 120v 60Hz clock it needs 120v 60Hz to work properly.
If you try to use on a 240v 50Hz supply, you'll need a transformer to change the line voltage to 120v. As there is no inexpensive reliable way to change the Hz, or AC cycles, it will run on 50Hz, and will lose 10 seconds every minute, which is 600 seconds (10 minutes) every hour, or 4 hours every day.
An AC clock uses a synchronous motor, which turns the clock's hands through a gear train. Electromagnets in the motor create a rotating magnetic field to turn its rotor. The rotation rate of the motor shaft is synchronized to the utility frequency; 60 cycles per second (Hz) in North and South America, 50 cycles per second in most other countries.
The gear train scales this rotation so the minute hand rotates once every hour. A synchronous clock can be looked at as a mechanical counter, whose hands display a running count of the number of cycles of alternating current.
No.
You will burn up your appliance!!!!!
The formula you are looking for is V = IR where V = Voltage I = Current R = Resistance With some formula manipulation and numbers plugged in you get I = 120V / 9.6Ω I = 12.5A The kettle would have 12.5 volts of current running through it.
The larger of the two is neutral, smaller is hot.
Absoluteyl not.
Don't be stupid. No.
no.
Don't!
yes. but DO NOT do it the other way.
Off hand no but your explanations are not clear as to who is doing what to whom,,
"As far as charging the Toyota Camry Hybrid, you can plug it into any one of the standard 120V plugs.So as long as it can surge a 120V plug, then it can be used."
NO, unless you get a converter that converts 220 to 110.