0
10 MB mean 10 Megabytes.
It is an amount of data, there are 1024 Megabytes in a Gigabyte(GB), there are 1024 Kilobytes(KB) in a Megabyte, there are 1024 Bytes in a Kilobyte.
A song file might be 5 MB, so if you had two of it, then you would have 10MBs of data.
Note: MB (All capitols) means Megabytes, while Mb (Lower case 'B') means Megabit, there are 8 Megabits in a Megabyte, there are 8 Bits is a Byte.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
Is 100 mbps up and 25 mbps down good for xbox online gaming?
no 25 mbps is up not 100
What is half duplex 10 100 switch?
Full duplex means it can receive and send at the same time.10 100 means it supports both of these speeds (10 Mbps and 100 Mbps).Full duplex means it can receive and send at the same time.10 100 means it supports both of these speeds (10 Mbps and 100 Mbps).Full duplex means it can receive and send at the same time.10 100 means it supports both of these speeds (10 Mbps and 100 Mbps).Full duplex means it can receive and send at the same time.10 100 means it supports both of these speeds (10 Mbps and 100 Mbps).
How many Mbps in a cat 5 cable?
Cat5e is 100 mbps.
Is 72.38 a lot of megs?
Asuming you mean Megabytes, or Mbps, then no. There is ruffly 1000 mbps in 1 Gb. So a 100 Gb drive can hold 100000 Mbps. The average computer in 2011 has a 250 to 500 GB hard drive.
How do you get 300 Mbps wireless on a 100 Mbps network?
change security setting to wap2
Name three types of ethernet?
10-Mbps Ethernet, 100-Mbps or Fast Ethernet, and 1000-Mbps or Gigabit Ethernet.
How long it takes to download 25 GB in 100 mbps internet speed?
100 mbps, is very fast internet. Its about 4 min.
Fast Ethernet runs at what speed?
100 Mbps. There are several speeds for Ethernet; the term "Fast Ethernet" is used for the 100 Mbps variety.
What determines the speed of a LAN that consists of both 100 Mbps and 1000 Mbps devices?
1000000 mbs
100 mbps equals how much k bits?
1 mbps (mega bits per second) = 1000 kbps (kilo bits per second) as defined by IEEE. So, 100 mbps = 100,000 kbps.
What is 10100 Ethernet?
An Ethernet device that is capable of 10/100 operation is capable of transferring and receiving data at either 10 Mbps or 100 Mbps. Older devices were only capable of transferring at 10 Mbps. To be backwards-compatible, devices have to be capable of transmitting data at 10 Mbps.
How do you make a fast LAN?
By choosing the switch Bandwidth like 100 Mbps, or 1000 Mbps you can make fast LAN.
