Provides power (voltage and current) to a device.
In a 2-pin plug, the wire that is not present is the grounding wire. This type of plug only has two prongs for the live and neutral wires, unlike a 3-pin plug that includes a grounding wire for added safety.
When ever there is a potential difference between it and ground.
it gives you an electric shock
The three wires in a plug are typically called live, neutral, and earth wires. The live wire carries the current to the appliance, the neutral wire completes the circuit and carries the current back, and the earth wire is a safety feature to prevent electric shocks.
This is not true in all plugs it all depends on the manufacturer and the product. Plug wires come in all different colors such as red, black, brown, yellow, blue, and so on. So as I said the wire being brown is indicative of a certain manufacturer or product.
In a 230V plug, the standard color coding is as follows: the brown wire is the live (L) wire, the blue wire is the neutral (N) wire, and the green/yellow striped wire is the earth (E) wire. The live wire carries the current, the neutral wire returns it, and the earth wire provides a safety path in case of a fault. Always ensure proper connections and safety measures when dealing with electrical installations.
To properly wire a plug with 3 wires, you need to connect the live wire (usually brown), the neutral wire (usually blue), and the earth wire (usually green and yellow) to their respective terminals in the plug. Make sure to follow the correct wiring diagram and secure the wires tightly to prevent any electrical hazards.
A 'live' or 'hot' wire is a wire that is connected to a power source. This wire supplies voltage to a load ( light bulb, hair dryer, etc.). When the load is also connected a neutral or another live wire this becomes a path for the flow of current (amps) known as a circuit.
xbox live you mean and yes you can do that
With the cover off the plug and looking from the back at the screws the "Live" wire [generally red or brown] goes to the Left - and the "Neutral" wire [generally green] gos to the Right.Another way of putting this would be to say that the red wire must be connected to the prong that goes into the Left hole in the plug outlet in the wall.It is good practice to coil the earth wire in the plug so that, should the lead by tugged hard, it will be the LAST wire to become disconnected from the screws in the plug.AnswerCorrection .... sorry!! With the cover off the plug and looking from the back at the screws the "Live" wire [generally red or brown] goes to the Left - and the "Neutral" wire [generally BLUE] goes to the Right. The Earth [genarally green] goes to the centre prong - assuming it is a 3-pin plug.
In a standard three-pin plug, the hot wire (live wire) is typically connected to the right pin when looking at the plug with the pins facing away from you. The left pin is usually the neutral wire, while the top pin is the earth (ground) wire. However, it's important to check local wiring standards, as they can vary by country.
In the UK Brown is the live, blue is the neutral and green/yellow is the earth. The live and neutral are the two wires that normally carry the current.