0
It means that there is .5mm from a particular spot on one thread to the corresponding spot on the next thread
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
Functions of micrometer?
Micrometer is a caliper used for measuring small distances.Another AnswerIn British English, a micrometer is an instrument used to measure small distances.In US English, it can mean the same thing, but it can also mean a unit of measurement of one-millionth of a meter (in British English, one-millionth of a metre is spelt, 'micrometre').
What does it mean of Resolution of 0.1 mm?
the smallest measurable part is 0.1mm. I would think you are talking about a measuring device, micrometer or caliper? In which case the smallest division that the device can measure is 0.10mm; that is the finest reading, the smallest part which the device will display is in 0.10mm's
What are the screw that has inclined plane?
I think you mean an Archimedes screw.
What does caliper mean?
A caliper is a measuring tool that measures either the inside or outside diameter of something. Disc brakes on a car use a caliper to push the brake pads against the rotor to stop the car.
What do the numbers for a screw mean?
length of the screw, and number of turns per inch
Functions of micrometer?
Micrometer is a caliper used for measuring small distances.Another AnswerIn British English, a micrometer is an instrument used to measure small distances.In US English, it can mean the same thing, but it can also mean a unit of measurement of one-millionth of a meter (in British English, one-millionth of a metre is spelt, 'micrometre').
What is micrometer drum?
I think you mean a drum micrometer, but I could be wrong. A drum micrometer is really a dial or digital caliper that checks the wear on a break drum on a car. The wear on a drum is on the inside of the drum and is checked by the ID (inside diameter) with the tool, a micrometer for the most part checks the OD (outside diameter) of something. The most accurate way of testing ID is with a spring loaded pin rod, then check the pin distance with a micrometer.
What is mean by pitch scale in screw gauge?
Screw Pitch is defined as the axial distance between threads. One complete revolution of the screw will move it into an object the distance of the pitch. The smaller the pitch, the greater the mechanical advantage (ability to do work) achieved.
What is screw diameter?
There are all sorts of screw diameters - major, minor, pitch, mean, etc., but in general a screw diameter is a called by its nominal diameter which is the major diameter of the screw, approximately. For example a 1/2 inch screw has a nominal diameter of 1/2 inch.
What does it mean of Resolution of 0.1 mm?
the smallest measurable part is 0.1mm. I would think you are talking about a measuring device, micrometer or caliper? In which case the smallest division that the device can measure is 0.10mm; that is the finest reading, the smallest part which the device will display is in 0.10mm's
What measures width?
If you mean what unit, then any distance unit, such as inches, feet, meters, yards, etc. For tools, you can use a ruler, tape measure, micrometer, caliper, yardstick, meter stick, surveyors chain, etc. to measure width, depending on what you are measuring.
What is the conclusion of screw jack?
Design of the screw : procedure core diameter of the screw is determined using allowable stress and the given load. Using the core diameter, the rest of the diameters and the pitch will be determined. -As screw is subjected to twisting moment, higher value of screw is selected. Select the dimension of dc w.r.t pitch Mean diameter d= do- p/2
Where is the air bleed screw on a snowmobile?
You mean for the hydraulic brakes?? Generally follow the brake line down to the brake caliper & you should find it there somewhere..Just lookfor the little nib kinda thing...
What does a number 6 screw mean?
# 6 screw is one of many US Numbers screws (where is pitch makes no difference in diameter) All Number screws are measured as follows: O.D = 0.060" + N(0.013") , where's N is the number of the screw , thus the diameter of # 6 screw is: 0.060" + 6(0.013") = 0.060" + 0.078" = 0.138"
What is the pitch of screw for bolt M12?
The pitch is the axial distance between threads, and the distance the thread moves with a 360 degree revolution. So if the pitch of a screw is 1mm, one revolution will move it 1mm farther down.
What are the screw that has inclined plane?
I think you mean an Archimedes screw.
What does caliper mean?
A caliper is a measuring tool that measures either the inside or outside diameter of something. Disc brakes on a car use a caliper to push the brake pads against the rotor to stop the car.
