P0016 - Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A)
symptoms
The engine may turn over but not start up
The engine may rattle near the harmonic balancer which means that the tone ring is damaged
The engine may start up and run, but run rough
cause
Timing chain is stretched, or timing belt skipped a tooth because its worn
Timing belt/chain not aligned
Tone ring on the crankshaft slipped or broken
Tone ring on the camshaft slipped or broken
Faulty crank sensor
Faulty cam sensor
Bad wiring to crank or cam sensor
Timing belt or chain tensioner faulty
The fix
Check the cam and crank sensors and their wiring for damage. If you see broken/frayed wires, repair.
If you have a scope, check the cam and crank patterns. If a pattern is missing, suspect a bad sensor or a slipping tone ring.
Remove the cam gear and crankshaft balancer and tone rings for proper alignment, make sure they're not loose or broken and they haven't sheared the alignment key. If they are correctly installed, replace the sensor. If the signal looks normal, then check the timing chain/belt for proper alignment. If it's not aligned, check for a damaged tensioner.
Also check that the belt or chain isn't stretched. replace and recheck.
Trouble code P0016 means: Crankshaft position/camshaft position, bank 1, sensor A- correlation
Trouble code P0016 means: Crankshaft Position - Camshaft Position Correlation - Bank 1 Sensor A Trouble code P0034 means: Turbo/Super Charger Bypass Valve Control Circuit Low
Have the car re-scanned. P0310 is cylinder #10 misfire. This code is no applicable to the Accent.
what is p260f code mean
This code is for a problem with the cam / crank correlation and the variable timing system. Several difernt things can cause this code. Anything from a bad sensor, solenoid, to internal engine problem.- Tech JK --------------------------------------
what does code b 124 mean
Trouble code P0172 means: System too rich (Bank 1)
The code 1709 is pointing to a problem with the Kick Down Servo Switch. Circuit open or shorted to ground.
P0440 = EVAP Emission Control System Malfunction.
Oil Change
Trouble code P0562 means:System voltage low
Oil Change Time
wat does b125 mean on a acura rl