The top 5-10 cm's of wet sand require continuous flow of oxygen rich water. The colloidal and dissolved impurities are removed through a process of adsorption and the organic materials are converted to salt during the same process. The filtered water collects at the bottom of the sand filter through a pipe system. The whole process allows a bio film to form in the fabric filter at the top of the sand bed.
http://www.aquatext.com/images/systemph/sandfilters1.htm
Nothing if its a sand filter However if sand is coming into the pool from the filter then you may have to replace one ore more laterals in the sand filter as they have worn and are letting sand through to the pool,
Yes. It will clog the filter.
If you have a sand filter the laterals in it may be starting to show signs of wear these wil blow sand from the sand filter into the pool when they wear out.
It could damage the internal PVC of the filter and cause sand to get in your pool.
The sand filter wont make a pool green this happens a s a result of algae.
look at the filter if theres a hole well there you go that's the sign
If you are getting sand coming into the pool and have a sand filter you may have to replace worn laterals in the sand filter.
No.
Yes, it just depends on what kind of sand it is
Your filter will tell you on the side of it how much media sand to put in it.
One of the lateral returns inside of your sand filter may have snapped. When that happens, it can send sand out of your returns. Have your local pool place repair your sand filter.
Usually the top of the sand filter is above the water level of the pool, so all you have to do is unscrew the top and look in. However if the filter is below the pools water level you will have to cut of the water coming from and to the pool before you do. who added the sand? If you did - did you follow the manufacturer's instructions as to how much and what type of sand to use? Instructions tell you - - SPECIFICALLY - - how many pounds of # 20 silica sand to use.