Chuck lathe when referring to engineering is a term that is used for a clamp (chuck) that is used to help keep things in tact. Using this in engineering is useful as the engineer must design buildings and use parts that are strong and durable.
One would use a lathe chuck as a type of clamp used to hold onto the rotating tool bit on a lathe, a lathe chuck is also known by a different name: a collet.
The backing plate on a lathe is used to mount the chuck to it and is the adapter to the lathe spindle.
A 3-jaw chuck is the device attached to the spindle of the lathe that clamps and rotates the workpiece for machining. This type of chuck is self-centering which means that the three jaws move in unison at the same diameter when the chuck is opened or closed.
An engineering lathe uses hard steel tool bits mounted in a small, movable vice to shape the material it's working on.
The base is made of aluminum.
The package is part of the workpiece.
(mechanical engineering) A small engine or toolroom lathe suitable for attachment to a workbench; bed length usually does not exceed 6 feet (1.8 meters) and workpieces are generally small.Read more: bench-lathe-mechanical-engineering
Using a drive plate on a lathe requires removing the chuck and the drive plate is attached in its place onto the spindle.
A chuck is used to hold small cylindrical jobs in a lathe. Various chuck types like 3-, 4- and 6-Jaw self centering chucks or independent 4-Jaw chucks can be used. Some small cylindrical jobs can also be held between two centers on a lathe.
this is a vertical turret lathe you stand the workpiece on a horizontal chuck
On a wood turning lathe, the faceplate is screwed to the piece of wood, then the faceplate is held in place by the chuck. This facilitates free-wheeling the opposite end for such items as bowls. Almost similar to a wood turning lathe, the face plate on a metal lathe is a device that is used instead of a chuck. It allows a workpiece to be clamped or bolted to it for machining.
The swing of a lathe can be increased if the gap-bed section is removed, providing the lathe has this option and the workpiece is not longer than the gap when clamped in the chuck.