99% of the time with that code it is saying bank 1 cam shaft is off any more than likely is a mechanical engine problem causing that problem.since it runs very bad more than likely a timing chain has jumped or an idler sprocket has failed.it would need to be taken to a shop and they have to take apart and check the physical alignment of the chains to the cam sprockets
The engine control module (ECM) tests for a misalignment between both camshafts on one bank of the engine and the crankshaft. The misalignment would be at an idler sprocket for either bank or at the crankshaft. Once the ECM learns the position of both camshafts on one bank of the engine, the ECM compares the learned values to a reference value. The ECM will set a DTC if both learned values for one bank of the engine are exceeding a calibrated threshold in the same direction.
How do you change headlight on suzuki xl7
How do you change headlight on suzuki xl7
The power button is for towing vehicles.
Suzuki XL7 was previously known as the Grand Vitara (GVT for short)
the wheel torque for an 07 Suzuki XL7 is 80 lbs
I have a Suzuki xl7 2008 and the ac light is flashing and the Suv will not start
Trouble code P0400 means:Exhaust gas recirculation flow malfunction
Low tire pressure
well i would post the type of code that you have and i could help you ,you could also try your local suzuki dealer
How do I bleed brakes on a 2005 suzuki xl7 2wd
3000 pounds
Yes