The forward voltage at which the current through the junction starts increasing rapidly, is called the knee voltage or cut-in voltage.
Ramp voltage is a voltage that can be steadily increasing or decreasing.
Cut in voltage (Knee voltage): The forward voltage at which the current through the P-N Junction starts increasing rapidly is called as Cut in voltage or knee voltage.
Increasing the stimulus voltage in the simulation affect action potential mainly because increasing the current will automatically increase the voltage.
Knee voltage (cut in voltage) :-The forward voltage at which the current through the P-N Junction starts increasing rapidly is called as Cut in voltage or knee voltage Breakdown voltage :-It is the minimum reverse voltage at which the P-N Junction can conduct without damage to the current
increasing voltage
by increasing the terminal voltage
Induced voltage can be increased by increasing flux density, velocity of conductor cutting flux lines or increasing the size of your coil.
It's an increasing current, not voltage, that induces an e.m.f. into a coil. The reason that the induced e.m.f. opposes the increasing current is all to do with the Law of the Conservation of Energy.
Ohm's Law states that the current (I) flowing in a circuit is directly proportional to the applied voltage (E) and inversely proportional to the circuit's resistance (R).I = E/RAnother way of stating Ohm's Law is that the applied voltage (E) is directly proportional to both the current (I) and the resistance (R).E = IxR.So, if the voltage (E) is increasing, then either:if you know the resistance (R) is staying constant then the current (I) must be increasing - which you would see because you are monitoring it! or, if the current (which you are monitoring) is actually staying constant, then, for the voltage to be able to increase:the circuit's resistance must be increasing orthe increasing voltage could be caused by a combination of both increasing current and increasing resistance!
Voltage is not stoichiometric, so increasing the number of moles of a substance will not affect its voltage.
the main point is that.... by increasing of voltage the current will be increase...not by increasing of current voltage is increase....in that way we write that V is directly proportional to I...