It means that the computer has stored a diagnostic code and you should connect a code scanner to determine what the code means. If you can't do it yourself, you should take it to a shop. When something goes wrong, typically with a sensor or other electronic device, the computer detects the fault and stores it for diagnostic purposes, but you need to read the code to find out what it means.
The flywheel has kinectic energy that keeps the engine turningbetween firing strokes.
If your check engine light is on then check for the code and find out whats its about. It can also be a short in the wiring harness.
bars that are put up in front of the engine so that nothing goes into the airplane's engine.
If the service engine light keeps coming on and the code reads?æevap?æ?ævacuum that means the part needs to be replaced. A auto shop can help take care of the repairs.
A service engine light is not the same as a check engine light. In most instances the service engine light means you are in need of an oil/filter change. Refer to your owners manual to see what is needed at the mileage you are at on your vehicle. If you are talking about the check engine light then take the vehicle to a professional for repair.
No, changing the battery has no effect on how hot or cold the engine runs. The battery has one purpose and that is to store electricity that is used to start the engine and run the electronics on the vehicle. The alternator keeps the battery fully charged.
meaning that it's not going to work!
Keeps engine coolant from going through heater core when it is not needed.
By definition a line keeps going forever.
probabaly a knock sensor going off
On my 1997 maxima I had to replace it and found it in the air intake to the fan. this was under the dash. Its on a PC board and the air passing overit keeps it cool. Bob.
taking out he fuse disables the whole system..your alarm will no longer work