Want this question answered?
The purpose of a Pager Motor is to vibrate the pager / cell phone as a signal to its user, either instead of or in addition to making some kind of tone / music / ring. The vibrating is caused by a tiny rotary electrical motor, with an off-center weight attached to the drive shaft. When it spins, like a washing machine with an off-center load, it shakes the cell phone or pager.
Pagers work by using radio waves. Messages are sent via touch-tone phone, where the person sending the message types a text using their number key pad. The message is then displayed on the pager's screen.
Tone means something that the author uses in a book.
If you take a look at the label on the back of the pager, it is a 7 or 8 character code. It may start with a letter, but there are no letters embedded within the numbers. My pager lists it as the "FCC Number" The capcode is dependent upon the paging format. There are at least a half-dozen types of paging formats ranging from analog 2-tone capcodes to digital POCSAG that has 7 digits for capcodes. A common voice capcode format is 2-tone, which has 2 unique frequency tones that a pager will listen to. When it hears its 2 tones, it will page. Most of these capcodes are 4 characters .. like C123 or G456. The first character says what capcode plan is used, the second will tell you which columns the 3rd and 4th to look in. Its a series of table lookups if you have the capcode.If you have the 2 frequencies, those frequencies will resolve to several possible capcodes, but they all should cause the pager to alert when called.
There was a very mean tone in his voice when he spoke.
Describe the tone? And what he said?
no
tone
I have no idea what you mean my tone so I can not help. Sorry. :)
Tone is the attitude conveyed by the narrator of the story. To determine the tone pay attention to what the narrator says.
The tones. 1 is a high tone, 2 is a rising tone, 3 is a falling then rising tone and 4 is a falling tone.
When an answering machine or some other automated message requests that you enter a numeric message after the tone, dial your phone number on the touch pad (do not orally speak it). This is used as a pager, so that the person/business can call you back at their leisure.