to not let go at the brake pedal once you press it.
You brakes are wearing out and it takes them a longer time to stop you.
Go get your breaks checked out. You may need new breaks.
Step on the brake pedal.
You have to explain yourself better. What exactly do you mean?
If you mean the back brakes, I have a 1994 Lincoln Continental. To replace the pads on the back, I had to buy a special tool to depress the cylinder. Its a screw type cylinder and had to have this tool to put new pads on.
No- you are describing ABS- anti-lock brakes.
i do not no
you cant. it has to be replaced as a unit
Check your brake fluid level in the master cylinder... you may have a leak some where
you will need a c clamp to depress the caliper after pulling the brakes, first take the tire off second there are usually 2 bolts to the caliper remove the bolts third you will find the pads once you remove the caliper they will just snap in then you will need a flat surface to push agaisnt the caliper to depress it i usually use the old pad when you have finished you will need to pump your brakes in the car until the are hard.
you cant :)
Use a large C- clamp to depress the piston enough to remove the caliper.