Want this question answered?
All you need to do is add washer fluid. If the light is still on, the sensor or wiring have failed.All you need to do is add washer fluid. If the light is still on, the sensor or wiring have failed.
Low washer fluid or defective sensor in reservoir
Assuming you mean the low windshield washer fluid indicator, by just filling the reservoir with windshield washer fluid, the light should turn off. If not, the low washer fluid sensor may be faulty.
When the washer fluid light comes on any vehicle it means the fluid is low or empty. You can refill the washer fluid in the plastic jug located under the hood.
If the sensor is functioning properly, when you add the washer fluid the light should turn off automatically; no additional action required.
There is a magnetic float inside the washer fluid tank that causes a magnetic sensor on the outside of the tank to activate when the fluid is low. Either the sensor is bad or the float is stuck.
The sensor is inside the water bottle
If it stays on it means that the sensor is reading low level. Before doing anything you need to make sure that the sensor is working properly. You might have to disassemble the washer tank and take the sensor out and clean it. It's made in the way when you refill the tank the light must go away. If it doesn't something is wrong. Anyway if you want to force resetting the light you can disconnect the battery for about 5-10 minutes. Also you can use an error code reader to erase codes.
there are 2 lights that come on the dashboard 1 is the coolant indicator light that comes on if the coolant level is low or the sensor is bad. The other light is from the windshield washer reservoir level being low or a faulty sensor.
Low washer fluid.Low washer fluid.
A sensor light on the dash will come on indicating the car needs new washer fluid. To change the fluid, you open the hood and locate the container with the washer fluid symbol on it. You can unscrew the cap and pour more water in.
Should reset when fluid added--may be defective sensor in reservoir