the pata cable has the colors of the rainbow such as blue and red.
The red stripe marks pin one, which ensures the ribbon cable is pushed into the socket the correct way round.
Locate the red stripe on the cable and connect to the device with the red stripe lining up to pin #1 and If there is also no red stripe locate the blue stripe on the cable and connect to the device with the blue stripe lining up to pin #1
red
The red stripe on an IDE cable indicates the "pin 1" side of the connector. This marking helps users correctly align the cable when connecting it to both the motherboard and the hard drive or optical drive, ensuring proper data transfer and functionality. Incorrectly connecting the cable can lead to device malfunction or data loss.
Usually an arrow pointing to it, or a number 1 on the connector. It's also on the side with the red wire. And most boards are keyed with a slot on the side of the female part, and extrusion on the male connector... so it can only be inserted the proper way.
Pin 1 on a ribbon cable is usually colored differently than the other pins. It is often red.
Red Stripe was created in 1928.
It means 7.
The flag consists of three vertical stripes: the blue stripe stands for loyalty, justice and truth; the white stripe for purity; and the red stripe for courage.
red stripe blue stripe orange stripe
The red stripe on the ribbon cable indicates pin #1. Usually, pin #1 on the device is the one closest to the power connector.
The national flag of Cameroon is a horizontal green stripe on the left, followed by a red stripe and then a yellow stripe. In the center of the red stripe is a yellow star.