Want this question answered?
If it's a ka24e it's somewhere on the block.on most cars it right on top of the valvecover.so goodluck
below the right side of carb.
check your PVC valve, shake it and if it rattles,its ok.then check your hose and metal tube to see if its clogged.
where is PVC valve located on 2002 Nissan sentra
To change PVC valve on a 1993 Nissan 300zx, first remove the oil dip stick and remove the tension clip from the PVC valve hose. Then remove the hose and the old PVC valve. Replace with a new PVC valve.
It should be right on the valve cover somewhere.
The PVC valve on a 2000 Maxima is located in the rear valve cover just behind the throttle body. REMOVAL # Grasp the PVC valve and pull it out of the valve cover
On my '02 Dakota the PCV valve is on the driver's side valve cover. .
It's on the back of the intake plenum.
The PVC valve is located in the breather separator under the intake manifold.
Look under the intake manifold about the same height as the alternator, some, if not all of these will screw in. You may need a universal for your socket set.
The PVC valve on a 1999 Maxima is located in the rear valve cover just behind the throttle body.