It sounds like the program you are trying to use isn't installed on your computer. Go to the Mac Icon and click on it, then click all programs. Now look at the programs list and see if the program you want to use is listed there, if it isn't you will need to find your softwear program and install it.. You do that by putting the disk in the tray of your hard drive and a menu will pop up and you just follow directions.
There is a missing dialogue. Try downloading the AVG installation file and running repair installation.
Find and correct the cause of error
A source of error is something that could have caused you to obtain an incorrect result.
Hardware Failure
The error code E02 and F06 on a Maytag washer could mean that the hot water solenoid went out. It could also mean that that the hot water control is not working properly.
error
A telephone system is a device that transmit sounds between two points. This could mean installing two telephones, or it could mean installing an intercom in your house. Installation is just the act of making sure all the parts are there and hooked up properly.
A 404 error is a website couldn't be found on their server. But error 404 means that page you we're trying to find was corrupted.
the import has been blocked for being spammy unsafe importer error
Sometimes you will take the absolute value of the percent error because your estimated number could be less than the theoretical, meaning the calculation is negative. But an absolute value is always positive. A percent error can be left as a negative though, and this would be perfectly acceptable (or even preferred) depending on what you're doing.Answer:In the sciences, a negative percent error indicates a low result. If you have a 0% error, then your observed (lab) result was exactly the same as the theoretical result. A 5% error could mean that your observed result was a little high. A negative percent error is possible; if your observed results were lower than the expected, then you would have a negative percent error. A -5% error could mean that your results were a little low. Having a negative percent error isn't worse than positive percent error -- it could mean the same thing. If you were to have a choice in having a 20% error and a -5% error, the negative percent error is more accurate.
The rundll 32 exe-bad image error always appears when the recently-installed application or the dll file is not a valid Windows image. To solve it, you can check this against your installation diskette or reinstall the programs from the installation CD.
Error -1 is a bad error code. It means that the device OS could not be restored. Try to restore it two more times. If you continue to get Error -1 take the device in for service.