0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
How do you install a Ford 460 thermostat?
Remove the top radiator hose. Remove the water inlet on top of the motor. The thermostat is under the inlet. Replace the thermostat taking care not to place the new on in upside down. Clean off old gasket material from the inlet, install a new gasket and reinstall the inlet and hose.
How do you replace a thermostat in a 2000 dodge neon?
Drain the radiator. Remove the radiator hose. Remove the inlet from the engine. The thermostat is in the inlet. Replace the inlet and the gasket, and reverse the procedure to finish the procedure.
How do you tell if a intake manifold gasket needs replacing?
Irratic idling condition is indication of intake/inlet manifold gasket leak. Change gasket immediately. This particularly applies to EFI engines. Newaz.
Why is there oil in the water of my v6 commodore?
oil in the radiator water is normally caused by a faulty inlet manifold gasket.
Why does toilet inlet tube squirts water out of tank?
Is the small tube from the inlet to the overflow tube in place? Sometimes the gasket in the top of the fill valve will go bad and let it spray out of the top.
Why do bubbles appear in the rad inlet while your engine is running?
You probably have a bad head gasket or a cracked head or both.
Do you need to disconnect the aluminum inlet manifold from a peugeot 206 1.9d DW8 engine in order to replace the upper cylinder head cover gasket?
No.
You're changing the location of the canister on a protective maskYou've removed the canister the inlet valve assembly and the side voicemitter gasket?
negative pressure check
How do you change the cylinder head cover gasket without removing the aluminum inlet manifold peugeot 206 1.9d DW8 engine?
it does not need to be removed.
Is there a gasket between the inlet to the muffler and the B pipe on a 1989 Honda civic lx 4 door?
only if you put one there! there should be an exhaust donut there,.
Does 95 camaro 3.4 liter need sealant on timing cover gasket?
yes. permatex water pump silacone around the inlet and outlet for the pump.
You're changing the location of the canister on a protective mask You've removed the canister the inlet valve assembly and the side voicemitter gasket?
perform a negative pressure check
