Remove the top radiator hose. Remove the water inlet on top of the motor. The thermostat is under the inlet. Replace the thermostat taking care not to place the new on in upside down. Clean off old gasket material from the inlet, install a new gasket and reinstall the inlet and hose.
depends on the manifold style,year model etc...
thermostat install
The thermostat, in your 2003 Ford Escape, by removing the water hose and the 3 bolts from the thermostat housing. The thermostat will easily come out. Reverse the process to install the new thermostat.
The thermostat for a 6 cylinder Ford pickup is in the top radiator hose inlet. The hose and inlet need to be removed to install the thermostat..
On the front of the engine basically behind the thermostat housing.
That's a ford engine, you could install it with motor plates.
It would depend on the thermostat, probably 195 degrees.
WikiAnswers cannot show diagrams or pictures.
The Ford 460 engine oil to be used is 5W30 or 10W30.
The spring side goes INTO the intake manifold.
There are many things that can be found on the website called 460 Ford. Examples of things that can be found on the website called 460 Ford includes Ford forum discussions and Ford images.
I currently have a 1972 Ford F250 with a 460 in it.