depends on the manifold style,year model etc...
absolutely not the 302 is in the front and the 460 is in the rear
if you change the bell housing
no
On the front of the engine basically behind the thermostat housing.
Gose counterclockwise on 302-360-390 and 460.
the bell housing bolt pattern is the same but the flywheel on 460 is thicker and makes they pressure plate hit bellhousing from 351m/400 there for it will not work you have to have a bellhousing from a 429 or 460
Fords 5.8 liter engine is 351 cubic inches ( Ford calls there 302 a 5.0 liter and there 460 a 7.5 liter )
take the filter off then unscrew the bolt at the oil filter housing
300-i6, 302 v8, 351 v8, 400 v8, 460 v8
No. the bolt pattern is different.
Yes, but first you need a swap to a small block bellhousing, converter, and flexplate. Probably easier and cheaper in the long run to sell/trade what you've got for a c4 already set up for a 302.
No. You need a transmission for a 351 (5.8L) windsor, 302 (5.0L) or 300 (4.9L)6 cylinder. The 460 Trans will fit a 460, 429, 400, or 351 M or Modified. The 351M is a big block. Your 351 HO is a 351 W or Windsor. It's a small block.answernot all ho were windsor but you may have to change bell housing then it will fit