No. You need a transmission for a 351 (5.8L) windsor, 302 (5.0L) or 300 (4.9L)6 cylinder. The 460 Trans will fit a 460, 429, 400, or 351 M or Modified. The 351M is a big block. Your 351 HO is a 351 W or Windsor. It's a small block.
answernot all ho were windsor but you may have to change bell housing then it will fitspeed control switch inside trans
The ford f250 has a max speed of 112 to 118 miles per hours. That is in optimum conditions with no load.
What Year model
Yes
Trouble code P0323 means:Ignition/distributor engine speed input circuit intermittent
bad torque converter in trans
No. ... You absolutely cannot do this swap due to different transmissions bell housing bolt patterns. The frame stanchions for the 390 engine mounts would have to be swapped in to the '83. The 390 was discontinued in 1976 in the F250's so the 1977 had to have been swapped once before. Be sure the 1977 F250 you have is the correct year if, in fact, you actually do have a 390. Person above is an idot. Swap motor mounts, and swap engine. if you have a c6 trans in the f350 you be just fine.
7.3L turbo
12B
4 gallons
Answeri believe the automatic trans is the E40D, and the 5spd manual is the C6Yes the auto is the E4OD but the manual trans is called a model ZF trans.
The optional diesel engine in an '04 F250 Ford is a 6.0L V-8 Turbo Diesel made by Navistar (International)